156 157
Before the Using Timeshift Function
●
A USB hard drive with a speed of 5,400rpm or above is recommended. However, RAID-type USB
hard drives are not supported.
●
USB memory sticks or flash drives are not supported.
●
The total recording capacity may vary depending on the amount of available hard drive space
and the recording quality level.
●
If the available storage space falls below 500MB while both the Schedule Recording and Timeshift
functions are in progress, only the recording will stop.
●
The maximum amount of time available for the Timeshift function is 90 minutes.
●
The Timeshift function is not available for locked channels.
●
A time-shifted video is played according to the TV settings.
●
Before the Timeshift function can be used, the Device Performance Test must be performed on
the USB storage device connected to the TV. To perform the Device Performance Test, select
USB Drive in the MY CONTENT panel and then select the recording device.
●
The Timeshift function may be terminated automatically once it reaches its maximum capacity.
●
The Timeshift function requires at least 1.5GB of free space available on the USB storage device.
●
Launching an app, switching to an analogue channel, or changing the TV to a mode that does
not support the Timeshift function automatically terminates the Timeshift function. The Timeshift
operation will resume if the TV is changed back to a digital channel again.
To Next Page
Loading...
Need help?
General
