136
If malicious code is detected
If malicious code was found, the results of the scan will appear on the screen. This result window
displays all malicious code found, and provides options to either quarantine the code or allow them to
continue.
1.
Select all malicious code to quarantine or allow.
2.
Select Isolate or Block. This moves the selected malicious code to the Isolated List or Blocked
List.
"
The Isolated List displays all quarantined malicious codes. You can try to cure the codes.
"
The Blocked List displays all blocked malicious code. You can also quarantine or allow codes from this
list.
Configuring additional functions in Smart Security Settings
System Smart Security Settings
Try Now
●
Antivirus
Monitors the TV in real-time to prevent virus from infecting the TV.
●
Network Security
Protects the TV from hacking to minimize a leak of private information.
●
Camera
Turn the TV camera on or off.
●
Microphone
Turn the TV microphone on or off.
●
Auto Scan
Makes the TV automatically scan itself and connected storage media when it is turned on.
●
Auto Isolate
Adds malicious codes found during the scanning process to the Isolated List automatically.
To Next Page
Loading...
Need help?
General
