1-104
BEFORE USING THE MACHINEâ–ºPERIPHERAL DEVICES
SUPPLIES
The finisher requires the following staple cartridge:
Staple cartridge (approx. 5000 staples per cartridge x three cartridges)
MX-SCX1
INNER FINISHER MAINTENANCE
When the staple cartridge runs out of staples, a message will appear in the operation panel. Follow the operation
procedure to replace the staple cartridge.
Replacement the staple cartridge
1
Open the finisher front cover.
2
Push lever and move the finisher.
3
Lower the staple case release lever
and remove the staple case.
Pull the staple case out to the right.
To Next Page
Loading...
Need help?
General
