7-161
SYSTEM SETTINGSâ–ºSYSTEM SETTINGS
Sleep Mode Power Level
Low Power: The machine switches to the power saving mode, but it takes some time to recover.
Fast Wake Up: Compared with Low Power, the power value rises by a certain degree, but it results in faster recovery.
Eco Scan Setting
Eco Scan Setting is used to execute a non-print operation such as image sending and scan to HDD while the fusing unit
is turned Off.
Set "Eco Scan Setting" to , and select a mode or screen in which to enable Eco Scan Setting.
The following modes and screens can be set.
• Home Screen
• Copy
• Image Send
• Document Filing
•System Settings
• Sharp OSA
• Manual Finishing
Energy Saving Pattern List
This function analyzes machine usage and controls entry into auto power shutoff mode based on frequency of use.
If you want to manage machine power by using an energy saving pattern list, select [Manual] in [System Settings] - [Eco
Setting] - [Change transition time by time of day.], and select an Automatic Update Pattern from the pull-down list or one
of Original Eco Patterns 1 to 4.
To automatically analyze machine usage and update the pattern as needed, set Automatic Update Pattern.
Edit Pattern
Set the Original Eco Pattern.
Item Description
Change Pattern Name To change the pattern name, enter the desired name.
Pattern to Be Modeled
Select the stored pattern that you want to base the new pattern on. To copy the settings of
a selected pattern, select [Copy the selected pattern.].
Energy Save Setting
Set time periods for machine modes. Select a mode from 1 to 4, and select a day of the
week, start time, and end time.
Day of the Week
Set the day of week on which you want to enable the mode selected in the Energy Save
Setting.
Start Time/Completing Time
Set the period of time during which you want to enable the mode selected in the Energy
Save Setting.
To Next Page
Loading...
Need help?
General
