2-101
COPIERâ–ºOTHER FUNCTIONS
INSERTING INSERTION SHEETS IN BETWEEN
TRANSPARENCY FILMS (TRANSPARENCY INSERTS)
When copying on transparency film, the sheets may stick together due to static electricity.
The transparency inserts function can be used to automatically insert a sheet of paper between each sheet of
transparency film, making the sheets easy to handle.
It is also possible to copy on insertion sheets.
When performing 2-sided copying, only "2-Sided→1-Sided" mode can be used.
• The number of copies cannot be selected in this mode.
• Transparency film must be loaded in the bypass tray.
1
Place the transparency film face down
in the bypass tray, and load
transparency film sheets.
After loading the transparency film, configure the bypass
tray settings.
â–º MAKING COPIES USING THE BYPASS TRAY (page
2-35)
2
Place the original.
Place the original in the document feeder tray of the automatic document feeder, or on the document glass.
â–º AUTOMATIC DOCUMENT FEEDER (page 1-75)
â–º DOCUMENT GLASS (page 1-77)
3
Tap the [Others] key, and then tap the [Transparency Inserts] key.
To Next Page
Loading...
Need help?
General
