7-94
SYSTEM SETTINGSâ–ºSYSTEM SETTINGS
Erase Width Adjustment
This is used to set the default erase width for erase function. Specify a value from 0" (0 mm) to 1" (25 mm) in increments
of 1/8" (3 mm) for both edge erase and center erase.
Time Specified Output of Received Data
This function is available when the Received Data Image Check Setting is enabled. * This is displayed when a facsimile
expansion kit or Internet fax expansion kit is installed.
If "Time Specified Output of Received Data" is set to , this setting is grayed out.
If "Change Password" or "Hold Setting for Received Data Print" is set to , the password entry field is grayed out.
Enable/Disable Settings
Settings to Disable Registration
Storing from the machine, storing from Setting mode (Web version), and storing from the PC can each be separately
prohibited.
Disable Registering Destination from Operation Panel
Disables address control from the machine.
Configure the setting for each of the following items:
• Group (Direct Entry)
• Group (Address Book)
Select All: Selects all items.
Clear Checked: Clears all selections.
Disable Registering Destination on Web Page
Disables to store the destination from Setting mode (Web version).
Configure the setting for each of the following items:
• Group (Direct Entry)
• Group (Address Book)
• Contacts
Select All: Selects all items.
Clear Checked: Clears all selections.
Disable Registration/Delection of All Program Items
This is used to prohibit the deletion and changing of image send settings stored in job programs.
Disable Registration of Memory Box
Disables all types of memory box registration.
Configure the setting for each of the following items:
Polling Memory, Confidential, Relay Broadcast (Direct Entry), Relay Broadcast (Address Book)
Disable Destination Registration Using Global Address Search
This disables address control from the global address search.
Configure the setting for each of the following items:
E-mail, Internet Fax, Fax
Disable Registration Using Network Scanner Tool
This disables address control from the Network Scanner Tools.
Use this option to suppress to store data of another machine through Inbound Routing of address book.
Disabling of Forwarding via Network
This prohibits inbound routing.
To Next Page
Loading...
Need help?
General
