Configuration (WBM)
5.13 Monitoring
LOGO! CMR2020, LOGO! CMR2040
Operating Instructions, 10/2016, C79000-G8976-C356-03
113
Message texts
Adding a new message text
You can create various SMS message and e-mail texts.
You can assign a symbolic name to every message text. You can create the text freely with
a maximum of 160 characters per message text.
● You configure which texts are sent to which recipient groups in the Actions (Page 117)
tab.
● If you click the "Apply" button, all the settings you made in the "Message texts" tab are
adopted.
Sending process values and parameters along with the message
In the SMS and e-mail message texts and in the e-mail subject, you can also send process
values and parameters such as time, date and GPS position.
If placeholders are used, 2 SMS messages will be sent under some circumstances.
You will find the formats permitted for the placeholders of the process values in Permitted
characters and string lengths (Page 59).
In this tab you configure individual signals for further use.
A maximum of 32 signals can be configured.
Signals for the monitoring
Here you specify which process data or changes, statuses, triggers or other internal data
that you want to use as signals for further monitoring. You then use these signals to
configure the events.
Signals for SMS and e-mail texts.
Signals of the data source BM with the signal type "variable memory" and signals of the
CMR can also be used as placeholders for variables in the text of SMS messages and e-
mails.
Please note: When using a configured signal, you must not send the data type in the SMS
text.
To Next Page
Loading...
Need help?
General