Configuration (WBM)
5.6 System
LOGO! CMR2020, LOGO! CMR2040
Operating Instructions, 10/2016, C79000-G8976-C356-03
71
Activate/deactivate GPS reception.
Make sure that an antenna is connected to the GPS input:
● To activate GPS, select the entry "Yes" from the "Activate GPS" drop-down list.
● To deactivate GPS, select the entry "No" from the "Activate GPS" drop-down list.
With the CMR2040 note the information on updating the displayed GPS satellites in the
section Start page (Page 67).
If you click the "Apply" button, all the settings you made in the "General" tab are adopted.
Display of the following parameters:
● System runtime since the last restart.
● Article number of the CMR
● Serial number of the CMR
● Hardware product version of the CMR
SD card
SD card
Displayed data
●
●
Total free memory space (kB)
Here the free (still available) and the entire memory on the SD card that can be used by
the user are displayed.
Savable files below the parameter area
Below the parameter area, the names of the files saved on the SD card are displayed. By
clicking on the file name, you can open the file from the SD card and save it to the file
system of your PC.
To Next Page
Loading...
Need help?
General