Siemens HiPath 4000 User Manual

Individual phone configuration
139
Step by Step
Adjusting audio settings
Optimize the audio settings on your OpenStage for your
environment and according to your personal require-
ments.
Volumes
You can preset different volumes for the following mi-
crophones and signals in eight levels:
• Loudspeaker
• Ringer
•Handset
• Headset
• Handsfree
• Rollover
• Warning tone
v Press the key shown until the "Settings" tab is active.
Confirm the option shown.
if nec.
j Enter and confirm the user password.
Select and confirm the option shown.
Select and confirm the option shown.
Select the entry you want (e.g. "Ringer").
Confirm the option shown.
W or ac Setting the volume.
Z While setting the volume, you will hear corresponding
audio feedback.
i Confirm the option shown.
b Select the "Options" entry.
Select and confirm the option shown.
or
h Press the key shown.
Confirm the option shown.
Use the touch slider to adjust the current volume
settings.
User
Audio
Volumes
Save & exit
Save

Siemens HiPath 4000 Specifications

General

Architecture	Modular
Supported protocols	SIP, H.323, ISDN
VoIP Support	Yes
ISDN Support	Yes
Analog Support	Yes
Integration	CTI, CRM, ERP
Compatibility	Siemens