Siemens HiPath 4000 User Manual

Step by Step
Enhanced phone functions
76
Announcement (broadcast) to all members of
a line trunk group
You can use this function to send an announcement to
all members (10 - 40) of a line trunk group.
Z Once you have activated the group call, you will hear a
confirmation tone. You can then begin the announce-
ment.
^ Lift the handset.
or
n Press the key and enter speakerphone mode.
j Enter the system code for "Speaker call-1-way bcst"
(contact the relevant service personnel if necessary).
j Enter a group member’s phone number.
or
S Press the "Broadcst Spk" programmed sensor key.
j Enter a group member’s phone number.
Z The loudspeakers on all group phones are automatically
switched on and you will hear a confirmation tone. You
can begin the announcement.
\ You end the announcement by replacing the handset.
^ If a group member lifts their handset, they are connect-
ed to you and the announcement is ended.
n or S If a group member presses the speaker key or the rele-
vant line key for the announcement, they are discon-
nected from the announcement. If the last remaining
member of the group presses the speaker key or line
key, the announcement ends.
Enter code!

Siemens HiPath 4000 Specifications

General

Brand	Siemens
Model	HiPath 4000
Category	Telephone
Language	English