Siemens SIMATIC TIM 3V-IE DNP3 User Manual

The SINAUT Configuration Tool
6.5 The Subscriber Administration
TIM DNP3
150 System Manual, 12/2015, C79000-G8976-C253-04
6.5.2
Subscriber list
Information in the subscriber list
The window of the subscriber administration contains the following areas:
● Directory tree in the left-hand part of subscriber administration
● Subscriber list top right
● Parameter area below the subscriber list
Image 6-5 Windows of subscriber administration
Directory tree
By making a selection in the directory tree, a selection of subscriber types is displayed in the
subscriber list.
When using DNP3, the following subscriber types are not relevant: SMS master stations,
SINAUT ST1 subscribers, redundant ST7cc/ST7sc subscribers
The lowest directory "TIMs with TD7onTIM" is used to configure the TD7 software for the
TIM modules. You will find the description of the TD7onTIM configuration in the section
TD7onTIM (Page 158).
Subscriber list
In the subscriber list on the right, you will see the following entries for the DNP3
communications subscribers:
●
Subscriber no.
DNP3 address
The subscriber number is the DNP3 address of a subscriber for DNP3 communication

Siemens SIMATIC TIM 3V-IE DNP3 Specifications

General

Brand	Siemens
Model	SIMATIC TIM 3V-IE DNP3
Category	Control Unit
Language	English