Siemens SIMATIC TIM 3V-IE DNP3 User Manual

Diagnostics and upkeep
7.3 SINAUT diagnostics and service tool
TIM DNP3
280 System Manual, 12/2015, C79000-G8976-C253-04
4. Click on the Update details button if you require a detailed information on the firmware
update. The
Installation details dialog opens.
5. Click on the
Start Installation button in the Firmware Install dialog to start the repair. The
following dialog
Download informs you of the current progress of the procedure.
6. On completion of the repair, a dialog opens with a message to this effect. Confirm the
message with
OK .
Installation details dialog
The Installation details dialog that can be opened from the Firmware Install dialog displays
detailed information on the repair. For each firmware component, the function and version on
the TIM module and on the PG are shown and you can also see whether the component will
be copied, replaced, ignored or deleted during the repair.
The various actions have the following significance:
●
copy
: The file is copied from the PG to the TIM module.
●
replace
: The file on the TIM module is replaced by the file on the PG.
●
ignore
: The file is not affected by the repair.
●
delete
: There is no newer version for the file. The existing file is no longer required and is
deleted during the repair.
7.3.6
Messages in the diagnostic buffer of the TIM
7.3.6.1
Introduction
Introduction
In much the same way as on and S7 CPU, a diagnostic buffer is also maintained on the TIM.
The TIM stores its specific diagnostic messages in this buffer. The diagnostic messages of
the TIM module are read out in the same way as those of a CPU.
Note
If there is no text file with the diagnostic texts of the TIM events on the PG with which the
d
iagnostic buffer is read out, the events are displayed in hexadecimal format.

Siemens SIMATIC TIM 3V-IE DNP3 Specifications

General

Brand	Siemens
Model	SIMATIC TIM 3V-IE DNP3
Category	Control Unit
Language	English