Siemens SIMATIC TIM 3V-IE DNP3 User Manual

Diagnostics and upkeep
7.3 SINAUT diagnostics and service tool
TIM DNP3
System Manual, 12/2015, C79000-G8976-C253-04
265
7.3.4
Message protocol diagnostics
Introduction
To read out messages, SINAUT DNP3 provides you with the option of recording and
archiving transferred messages on the TIM as a storable TIM message log.
the TIM message log (protocol) is used to record messages received and sent by a TIM
module.
The message protocols are displayed in a message list in the form of a table.
Note
The functions of
message protocol diagnostics are used only for the analysis of already
stored message protocols.
TIM message logging is activated as follows:
•
In the "TIM Message Monitor" function of the SINAUT diagnostics and service tool
7.3.4.1
TIM message protocol
Description of the functions
The recording of the TIM messages is started with the TIM Message Monitor of the SINAUT
diagnostics and service tool. The messages received and sent by the routing server of the
TIM are recorded.
The
TIM message protocol function is used only to open a TIM message protocol for
subsequent evaluation.
Operator activities
1. Open the TIM message protocol by selecting the Project / TIM Message Protocol menu.
The
Open dialog is displayed.
2. In the file tree, select the directory and the
7DT file of the required TIM message protocol
and confirm with the
Open button. The TIM message protocol is opened in a separate
window.
Note
You activate and deactivate recording of the TIM message protocol and specify the name
and storage location of the message protocol file using the
TIM Message Monitor
function
of the diagnostics and service tool.

Siemens SIMATIC TIM 3V-IE DNP3 Specifications

General

Brand	Siemens
Model	SIMATIC TIM 3V-IE DNP3
Category	Control Unit
Language	English