Siemens SIMATIC TIM 3V-IE DNP3 User Manual

Diagnostics and upkeep
7.3 SINAUT diagnostics and service tool
TIM DNP3
264 System Manual, 12/2015, C79000-G8976-C253-04
7.3.3.6
SDB Viewer
Description of the functions
The SDB Viewer function lists the content of the system data blocks (SDBs) of a previously
selected CPU or TIM module.
For TIM modules, the following SDB classes can be selected for display:
● SDB0
● WAN data
● Subscriber data
● Connection data
● LAN connections
● TD7onTIM data (only TIM modules on which parameters have been set for TD7onTIM)
● Ethernet data (only TIM modules that are connected to Ethernet)
● Routing data
● Connection data (PBC)
Apart from SDB0, the representation of the SDB data for the TIM modules is in plain text (as
default), you can, however, change to hexadecimal display. The CPU DBs are always
displayed in hexadecimal and the corresponding button cannot be deactivated here.
When accessing the subscriber using the
SINAUT subscriber list , you have the option of
displaying the system data blocks from the module (
online ) or from the project ( offline ).
There may be differences between online and offline access.
The content of all system data blocks can be saved as a text file.
Operator activities
1. Select a subscriber in the SINAUT subscriber list of the open project or in Accessible
Nodes
.
2. Open the
SDB Viewer dialog by selecting the SINAUT / SDB Viewer menu.
3. To access data online on the connected module (instead of the project data), deselect the
offline option on the right to the dialog. The data display is updated immediately with the
current module data.
4. Select the required system block class (SDB0, WAN data etc.) in the
System data blocks
list box.
5. Click on the
Save button to save the content of all system data blocks as a text file.

Siemens SIMATIC TIM 3V-IE DNP3 Specifications

General

Brand	Siemens
Model	SIMATIC TIM 3V-IE DNP3
Category	Control Unit
Language	English