Siemens SIMATIC TIM 3V-IE DNP3 User Manual

Installation and commissioning
4.2 Mounting and connecting up a TIM
TIM DNP3
64 System Manual, 12/2015, C79000-G8976-C253-04
4.2
Mounting and connecting up a TIM
4.2.1
Important notes on using the device
Safety notices on the use of the device
Note the following safety notices when setting up and operating the device and during all
associated work such as installation, connecting up or replacing the device.
WARNING
Safety requirements for installation
The devices are "open equipment" according to the standard IEC 61010-2-201or UL 508 /
CSA C22.2 No. 142. To fulfill requirements for safe operation with regard to mechanical
stability, flame retardation, stability, and protection against contact, the following alternative
types of installation are specified:
• Installation in a suitable cabinet.
• Installation in a suitable enclosure.
• Installation in a suitably equipped, enclosed control room.
4.2.1.1
Notices on use in hazardous areas
WARNING
The device may only be operated in an environment with pollution degree 1 or 2 (see IEC
60664-1).
WARNING
EXPLOSION HAZARD
The device must not be opened.

Siemens SIMATIC TIM 3V-IE DNP3 Specifications

General

Brand	Siemens
Model	SIMATIC TIM 3V-IE DNP3
Category	Control Unit
Language	English