Siemens SIMATIC TIM 3V-IE DNP3 User Manual

The SINAUT Configuration Tool
6.6 TD7onTIM
TIM DNP3
System Manual, 12/2015, C79000-G8976-C253-04
187
Dialogs for setting channel parameters
Depending on their function, the channels have different parameters:
● Obligatory parameters
These are general parameters that can be set depending on the channel class:
– Obligatory parameters of the send channels
– Obligatory parameters of the receive channels
● Specific parameters
These are special parameters for some channel classes. Not all channel classes have
specific parameters.
To set the parameters for the channels, you select the data object of a TIM with TD7onTIM
in the directory tree. The list box displays the channels of this object with the channel name
and channel type. If channels have already had parameters set, the input or output address
is displayed in the list.
Below the list box, there is a parameter assignment dialog for the channel selected in the list
box.
Image 6-14 Object "Bin04B_R" with the selected channel "Binary receive" in the list box and its
parameter dialog below

Siemens SIMATIC TIM 3V-IE DNP3 Specifications

General

Brand	Siemens
Model	SIMATIC TIM 3V-IE DNP3
Category	Control Unit
Language	English