Siemens SIMATIC TIM 3V-IE DNP3 User Manual

Diagnostics and upkeep
7.3 SINAUT diagnostics and service tool
TIM DNP3
System Manual, 12/2015, C79000-G8976-C253-04
259
Operator activities
1. Select a TIM module in the SINAUT subscriber list of the open project or in Accessible
Nodes
.
2. Open the dialog by selecting the
SINAUT / TIM Subscriber Diagnostics menu.
3. Select a subscriber in the selection list of the known subscribers on the left in the dialog.
4. To display the information on
Status or Partner , click on the relevant tab.
Status tab
The Status displays the following information on the subscriber selected on the left in the list
of known subscribers from the perspective of the connected TIM module:
● In the
General field:
– Availability of the known subscriber. Entries indicating problems are highlighted.
– Any connection disruptions
– Information on gateways to the known subscriber (subscriber local / remote)
● In the
Connection field:
– Interface of the connection
– Type of connection
– Connection enable
– Information on polling
– Status of data communication
Note
Media redundancy
With connections with redundant media, only one of the two connections is ever
active. As a result, in this dialog one of the two
possible connections is displayed as
being not available.
● In the Special field:
Not relevant for DNP3

Siemens SIMATIC TIM 3V-IE DNP3 Specifications

General

Brand	Siemens
Model	SIMATIC TIM 3V-IE DNP3
Category	Control Unit
Language	English