Siemens SIMATIC TIM 3V-IE DNP3 User Manual

Diagnostics and upkeep
7.3 SINAUT diagnostics and service tool
TIM DNP3
System Manual, 12/2015, C79000-G8976-C253-04
277
Operator activities
Note
Make sure that you select the correct TIM m
odule in your project. The station and module
name must match and the configured module must be of the same type as the module to
which you are downloading.
If this is not the case, a dialog will inform you of this at regular intervals during the update.
T
he display of this message interrupts the update until the dialog is acknowledged by
clicking on
OK .
1. Select the relevant TIM in the SINAUT subscriber list of the open project.
2. Start the function by selecting the
SINAUT / Firmware Update menu. The Firmware
Update
dialog opens.
3. Click on the
Update details button if you require a detailed information on the firmware
update. The
Update details dialog opens.
4. Click on the
Update button in the Firmware Update dialog to start the firmware update.
The following dialog
Loading informs you of the current progress of the update.
5. On completion of the firmware update, a dialog appears with a message to this effect.
Confirm the message with
OK .
Update details dialog
The Update details dialog that can be opened from the Firmware Update dialog displays
detailed information on the firmware update. The function and version of each firmware
component on the TIM module and on the PG is shown and you can see whether the
relevant component is copied, replaced, ignored, or deleted during the firmware update.
The various actions have the following significance:
●
copy
: The file is copied from the PG to the TIM module.
●
replace
: The file on the TIM module is replaced by the file on the PG.

Siemens SIMATIC TIM 3V-IE DNP3 Specifications

General

Brand	Siemens
Model	SIMATIC TIM 3V-IE DNP3
Category	Control Unit
Language	English