Simplicity Broadmotor Series User Manual

10 Hand Controls Service
Attachment Lift Lever Service
10 - 2
ATTACHMENT LIFT LEVER SERVICE
The attachment lift system is only used to lift the mower
deck.
Lift Lever Grip Replacement
The lift lever grip is press fitted to the lift lever (B, Figure
1). To remove the grip, twist it while pulling it off the
lever. To install a new grip, lubricate the lift lever with
soapy water and press the grip onto the lever.
Upper Lift Rod Replacement
NOTE: The lift lever (B, Figure 1) and related parts may
be more easily accessed with the battery removed.
1. Remove the hardware securing the lift lever (B,
Figure 1).
2. Disconnect the left lever (B) from the upper lift rod
(C).
3. Rotate the lift rod (C) out of the upper lift cam (L) and
remove from the bottom of the tractor. Install in
reverse order of removal.
WARNING
Before beginning any service work, turn the PTO
off, set the parking brake, turn the ignition switch
off, remove the key, disconnect the spark plug
wire, and disconnect the negative battery cable.
Figure 1. Attachment Lift System
B
C
A
K
H
L
M
N
O
P
J
D
E
F
Q
G
I
H
Side of
Lower Dash
A. Bushing
B. Lift Lever & Grip
C. Upper Lift Rod
D. Lift Plate
E. Lower Lift Cam
F. Washer & Locknut
G. Capscrew
H. Nylon Bushing
I. Spacer
J. Washers &
Nylock Nut
K. Brake Pedal
L. Upper Lift Cam
M. Lower Lift Rod
N. Capscrew
O. Brake Pedal Arm
P. Switch Actuator
Q. Clutch Rod
Lower Lift Rod Replacement
.1. Disengage the parking brake.
2. Remove the washer and locknut (F, Figure 1) secur-
ing the lower lift cam (E).
3. Separate the lower lift rod (M) and lower lift cam (E).
4. Separate the lower lift rod (M) from the upper lift cam
(L). Install in reverse order of removal.
Not for Reproduction

Simplicity Broadmotor Series Specifications

General

Brand	Simplicity
Model	Broadmotor Series
Category	Tractor
Language	English