EN
ATYSp - 542001E - SOCOMEC
19.11. Auxiliarycontacts(additional)
acces_396_a acces_397_a
Use
Pre breaking and signalling of positions I and II: each
reference provides a single factory or customer fitted
NO/NC contacts for both positions.
Low level auxiliary contacts: please consult us.
Rating(A) Framesize Typeofmounting Reference
125 … 630 B3 … B5 Customer fitted
1599 0502
(1)
800 … 1600 B6 … B7 Customer fitted
1599 0532
(1)
2000 … 3200 B8 - included
(1) Up to 2 auxiliary contacts can be ordered.
800 to 1600 A
125 to 630 A
Framesize
Nominal
current(A)
OperatingcurrentI
e
(A)
Rating(A)
250VAC
AC-13
400VAC
AC-13
24VDC
DC-13
48VDC
DC-13
125 … 3200 B3 … B8 16 12 8 14 6
19.12. Mountingspacers
atys_009_b_2_cat
Use
Increases the distance between the rear
power terminals and the backplate by 1 cm
per spacer.
This accessory may also be used to replace
the original mounting spacers.
Rating(A) Framesize Descriptionofaccessories Reference
125 … 630 B3 … B5 1 set of 2 spacers
1509 0001
19.13. 3positionpadlocking(I-0-II)
Use
Enables the ATyS to be padlocked in the 3 positions 0, I and II (factory fitted).
Rating(A) Framesize Reference
125 … 630 B3 … B5
9599 0003
800 … 3200 B6 … B8
9599 0004
atys_868_a
19.14. RONISKeyinterlockingsystem
Use
With the product in manual mode, it enables
locking in position 0 using a RONIS EL11AP
lock (factory fitted).
As standard, locking in position 0.
Optional padlocking in 3 positions: locking in
position I, 0 or II.
Rating(A) Framesize Reference
125 … 630 B3 … B5
9599 1006
800 … 3200 B6 … B8
9599 1004
19.15. Currenttransformers
Use - For ATyS p only
Used with ATyS p switches, current
transformers enable information to be
obtained on the load current.
Reference
Please see our general catalogue or our
website www.socomec.com
trafo_025_a_2_cat
trafo_077_b_1_cat
104 103
312313 314315 316317 63A64A 24 14 04 13
8 9
10
RJ
102 101
105106
414 413415
6
201
202
205 206204203
21
209208207
F2
L1 L2 L3 N
L1 L2 L3 N
24
24
LOAD
22
R1 R2 S1 S2 T1 T2
Opt. 3
Opt. 2
Opt. 1
4
Opt. 4
3
2
1
atys_829_c_1_x_cat