socomec ATyS s User Manual


EN
ATYSp - 542001E - SOCOMEC
1. GENERAL SAFETY INSTRUCTIONS
• This manual provides instructions on safety, connections and operation of the ATySp motorised changeover
switch manufactured by SOCOMEC.
• Whether the ATySp is sold as a loose product, as a spare, as an enclosed solution or as any other
conguration, this device must always be installed and commissioned by qualied and experienced
personnel, in line with the manufacturers recommendations, following good engineering practices and after
having read and understood the details in the latest release of the relative product instruction manual.
• Maintenance on the product and any other associated equipment including but not limited to servicing
operations must be performed by adequately trained and qualied personnel.
• Each product is shipped with a label or other form of marking including rating and other important specic
product information. One must also refer to and respect markings on the product prior to installation and
commissioning for values and limits specic to that product.
• Using the product outside the intended scope, outside SOCOMEC recommendations or outside the
specied ratings and limits can cause personal injury and/or damage to equipment.
• This instruction manual must be made accessible so as to be easily available to anyone who may need to
read it in relation with the ATySp.
• The ATySp meets the European Directives governing this type of product and includes CE marking on each
product.
• No covers on the ATySp should be opened (with or without voltage) as there may still be dangerous voltages
inside the product such as those from external circuits.
• DonothandleanycontrolorpowercablesconnectedtotheATySpwhenvoltagemaybepresent
ontheproductdirectlythroughthemainsorindirectlythroughexternalcircuits.
• Voltages associated with this product may cause injury, electric shock, burns or death. Prior to carry out any
maintenance or other work on live parts or other parts in the vicinity of exposed live parts, ensure that the
switch including all control and associated circuits are de-energized.
DANGER WARNING CAUTION
RISK:
Electric shock, burns, death
RISK:
Possible personal injury
RISK:
Equipment damage
• As a minimum the ATySp comply with the following international standards:
- IEC 60947-6-1
- GB 14048-11
- EN 60947-6-1
- VDE 0660-107
- BS EN 60947-6-1
- NBN EN 60947-6-1
- IEC 60947-3
- IS 13947-3
- EN 60947-3
- NBN EN 60947-3
- BS EN 60947-3
The information provided in this instruction manual is subject to change without notice, remains for general
information only and is non-contractual.

socomec ATyS s Specifications

General

Brand	socomec
Model	ATyS s
Category	Switch
Language	English