[105] Shooting Selecting the ISO sensitivity
ISO AUTO Min. SS
If you select [ISO AUTO] or [ISO AUTO] under [Multi Frame NR] when the shooting mode is P
(Program Auto) or A (Aperture Priority), you can set the shutter speed at which the ISO
sensitivity starts changing.
This function is effective for shooting moving subjects. You can minimize subject blurring while
also preventing camera shake.
Menu item details
FASTER (Faster)/FAST (Fast):
The ISO sensitivity will start to change at shutter speeds faster than [Standard], so you can
prevent camera shake and subject blurring.
STD (Standard):
The camera automatically sets the shutter speed based on the focal length of the lens.
SLOW (Slow)/SLOWER (Slower):
The ISO sensitivity will start to change at shutter speeds slower than [Standard], so you can
shoot images with less noise.
1/4000 ― 30":
The ISO sensitivity starts to change at the shutter speed you have set.
Hint
The difference in shutter speed at which ISO sensitivity starts to change between [Faster], [Fast],
[Standard], [Slow], and [Slower] is 1 EV.
Note
If the exposure is insufficient even when the ISO sensitivity is set to [ISO AUTO Maximum] in [ISO
AUTO], in order to shoot with an appropriate exposure, the shutter speed will be slower than the
speed set in [ISO AUTO Min. SS].
In the following situations, the shutter speed may not function as set:
When using the flash to shoot bright scenes. (The maximum shutter speed is limited to the flash-
syncing speed of 1/160 seconds.)
When using the flash to shoot dark scenes with the [Flash Mode] set to [Fill-flash] or [Wireless].
(The minimum shutter speed is limited to the speed automatically determined by the camera.)
MENU → (Camera Settings1) → [ISO AUTO Min. SS] → desired setting.
1
To Next Page
Loading...
Need help?
General
