Hint
Once the QR code has been read, this product's SSID (DIRECT-xxxx) and password are registered
to the iPhone or iPad. This enables you to easily connect the iPhone or iPad to the product via Wi-Fi
at a later date by selecting the SSID.
Note
Radio wave interference may occur as Bluetooth communications and Wi-Fi communications use the
same frequency band. If your Wi-Fi connection is unstable, it may be improved by turning off the
Bluetooth function of the smartphone. If you do this, the location information interlocking function is
not available.
When you record movies using a smartphone as a remote controller, the monitor of the product
becomes darker. Also, you cannot use the viewfinder during shooting the still images or movies.
If you cannot connect your device to this product using the QR code, use the SSID and password.
[236] Using wireless functions Connecting this product and a Smartphone
Controlling the camera using an iPhone or iPad (SSID)
You can control the camera using an iPhone or iPad by connecting the iPhone or iPad to the
camera using the SSID and password.
Return to the "Home" screen of the iPhone or iPad and launch PlayMemories
Mobile.
You can shoot an image using remote control while checking the composition of the
image on the screen of the iPhone or iPad.
MENU → (Application) → [Application List] → [Smart Remote Embedded].
QR code is displayed on the monitor of this product.
1
To Next Page
Loading...
Need help?
General
