Note
If you cannot make a connection, do as the following:
Launch PlayMemories Mobile on your smartphone, and then move the smartphone slowly toward
the
(N mark) of this product.
If the smartphone is in a case, remove it.
If the product is in a case, remove it.
Check whether the NFC function is activated on your smartphone.
Check whether [Smart Remote Embedded] is assigned to [One-touch(NFC)].
Radio wave interference may occur as Bluetooth communications and Wi-Fi communications use the
same frequency band. If your Wi-Fi connection is unstable, it may be improved by turning off the
Bluetooth function of the smartphone. If you do this, the location information interlocking function is
not available.
When you record movies using a smartphone as a remote controller, the monitor of the product
becomes darker. Also, you cannot use the viewfinder during shooting the still images or movies.
When [Airplane Mode] is set to [On], you cannot connect this product and the smartphone. Set
[Airplane Mode] to [Off].
If this product and the smartphone are connected when the product is in playback mode, the
displayed image is sent to the smartphone.
[233] Using wireless functions Connecting this product and a Smartphone
Controlling the camera using an Android smartphone
(QR code)
You can control this product using your smartphone by connecting your smartphone to the
camera using the QR code.
MENU →
(Application) → [Application List] → [Smart Remote Embedded].
QR code (A) and the SSID (B) are displayed on the monitor of this product.
1
To Next Page
Loading...
Need help?
General
