Deletes a registered face.
Note
Even if you execute [Delete], the data for registered face will remain in the product. To delete the
data for registered faces from the product, select [Delete All].
[134] Shooting Using the flash
Using flash
In dark environments, use the flash to light up the subject while shooting. Also use the flash to
prevent camera-shake.
When you do not use the flash
When not using the flash, press it back into the camera body.
Note
The light of the flash may be blocked if the lens hood is attached and the lower part of a recorded
MENU → (Camera Settings1) → [Face Registration] → [Delete].
If you select [Delete All], you can delete all registered faces.
1
Press the
(Flash pop-up) button to pop up the flash.
1
Press the shutter button fully down.
The available flash modes depend on the shooting mode and function.
2
To Next Page
Loading...
Need help?
General
