Power is not supplied to the product via a micro USB cable when the product is connected to a
computer, etc. If you use the supplied AC Adaptor, power will be supplied even when [Off] is
selected.
Note
Insert the battery pack into the product to supply power via USB cable.
[221] Customizing the camera Camera settings
PC Remote Settings: Still Img. Save Dest.
Sets whether to save still images stored in both the camera and the computer during PC
Remote shooting. This setting is useful when you want to check recorded images on the
camera without leaving the camera.
Menu item details
PC Only:
Saves still images only on the computer.
PC+Camera:
Saves still images on the computer and the camera.
Note
During PC Remote shooting, you cannot change settings for [Still Img. Save Dest.]. Adjust the
settings before you start shooting.
If you insert a memory card that is not recordable, you cannot shoot still images even if you select
[PC+Camera].
If you select [PC+Camera] and you have not inserted a memory card into the camera, you cannot
release the shutter even if [Release w/o Card] is set to [Enable].
While you are playing back still images on the camera, you cannot shoot using PC Remote.
[222] Customizing the camera Camera settings
PC Remote Settings: RAW+J PC Save Img
PC Remote: Uses "Remote Camera Control" to control this product from the computer, including such functions
as shooting and storing images on the computer.
*
MENU → (Setup) → [PC Remote Settings] → [Still Img. Save Dest.] → desired
setting.
1
To Next Page
Loading...
Need help?
General
