switch set to the LOCK position. Set the switch to the record position.
Cannot open the shutter since the memory card is not inserted.
No memory card has been inserted.
To release the shutter without inserting a memory card into the camera, set [Release w/o
Card] to [Enable]. In this case, images will not be saved.
This memory card may not be capable of recording and playing normally.
An incompatible memory card is inserted.
Processing...
When performing noise reduction, the reduction process takes place. You cannot do any
further shooting during this reduction process.
Unable to display.
Images recorded with other products or images modified with a computer may not be
displayed.
Processing on the computer such as deletion of the image files may cause inconsistencies
in the image database files. Repair the image database files.
Check that a lens is mounted. For an unsupported lens, set "Release w/o Lens" in the
menu to "Enable".
The lens is not attached properly, or the lens is not attached. If the message appears when
a lens is attached, reattach the lens. If the message appears frequently, check whether the
contacts of the lens and product are clean or not.
When attaching the product to an astronomical telescope or similar instrument, or using an
unsupported lens, set [Release w/o Lens] to [Enable].
Unable to print.
You tried to mark RAW images with a DPOF mark.
Internal temp. high. Allow it to cool.
The product has become hot because you have been shooting continuously. Turn the power
off and cool the product and wait until the product is ready to shoot again.
You have been recording images for a long time, the product temperature has risen.
Recording is unavailable in this movie format.
Set [
File Format] to [MP4].
To Next Page
Loading...
Need help?
General
