Sungrow SG10RS User Manual

75
7
iSolarCloud App
7.1 Brief Introduction
The iSolarCloud App can establish communication connection to the inverter via the WLAN,
providing remote monitoring, data logging and near-end maintenance on the inverter. Users
can also view inverter information and set parameters through the App.
* To achieve direct login via WLAN, the wireless communication module developed and
manufactured by SUNGROW is required. The iSolarCloud App can also establish communi-
cation connection to the inverter via Ethernet connection.
• This manual describes only how to achieve near-end maintenance via WLAN
direct connection.
• Screenshots in this manual are based on the V2.1.6 App for Android system,
and the actual interfaces may differ.
7.2 Installing App
Method 1
Download and install the App through the following application stores:
• MyApp (Android, mainland China users)
• Google Play (Android, users other than mainland China ones)
• App Store (iOS)
Method 2
Scan the following QR code to download and install the App according to the prompt
information.
The App icon appears on the home screen after installation.

Sungrow SG10RS Specifications

General

Rated Power	10 kW
Max. DC Voltage	1100 V
Number of MPPTs	2
Max. Efficiency	98.6%
Protection Rating	IP65
Start Voltage	180 V
Rated AC Output Power	10 kW
Max. AC Output Power	11 kW
Rated Output Voltage	230 V
Operating Temperature Range	-25°C to 60°C
Topology	Transformerless
Cooling Method	Natural Convection
Maximum Power Output	11 kW
Maximum Input Current	25 A
MPPT Voltage Range	160-1000 V
Max. DC Input Power	15 kW
AC Voltage Range	180-280 V
Humidity Range	0-100%
Communication	RS485