2. Maintenance Information
2-13
Brake Light Switch/Starting Inhibitor
Switch
The brake lamp switch is to light up brake lamp as
brake applied.
Make sure that electrical starter can be operated
only under brake applying.
Headlight Beam Distance
Turn on main switch
Headlight beam adjustment. Turn the headlight
adjustment screw to adjust headlight beam high.
Caution
To adjust the headlight beam follows related
regulations.
Improper headlight beam adjustment will make
in coming driver dazzled or insufficient
lighting.
● Tire pressure check should be done as cold
engine.。
Tire pressure as
cold engine
(Kg/cm²)
Check if tire surface is ticked with nails, stones or
other materials.
Check if front and rear tires’ pressure is in normal.
Measure tire thread depth from tire central
surface.
Replace the tire if the depth is not come with
following specification
Front tire：1.5 mm
Rear tire：2.0 mm
Headlight beam adjustment screws
To Next Page
Loading...
Need help?
General