TB9300 Installation and Operation Manual Preface 7
© Tait International Limited April 2024
Preface
Scope of Manual
This manual provides information on installing and operating the TB9300
base station. It is intended for use by experienced technicians familiar with
installing and operating base station equipment. It also includes
configuration, maintenance and troubleshooting information.
Unless mentioned specifically, this manual will use the term “base station”
to refer to both base station, and repeater.
Document Conventions
The TB9300 base station has a web interface (WebUI) with an accordion
menu on the left side of the screen. “Configure > Base Station > Channels”
means click Configure in the top-level menu, then in the expanded
Configure menu, click Base Station, and finally click on the Channels tab
on that page.
Within this manual, four types of alerts may be given to the reader. The
following paragraphs illustrate each type of alert and its associated symbol.
Warning This alert is used when there is a hazardous situation
which, if not avoided, could result in death or serious injury.
Caution This alert is used when there is a hazardous situation which,
if not avoided, could result in minor or moderate injury.
Notice This alert is used to highlight information that is required to
ensure procedures are performed correctly. Incorrectly performed pro-
cedures could result in equipment damage or malfunction.
This icon is used to draw your attention to information that may
improve your understanding of the equipment or procedure.
To Next Page
Loading...
Need help?
General
