Name: Tait TB9300
Brand: Tait
Rating: 5 (1 reviews)

To Next Page

To Previous Page

TB9300 Installation and Operation Manual Working with Base Stations from Your PC 93

5.2.3 Security Certificates

You can upload your own security certificates to the base station (Tools >

Settings > Web certificate). If you have installed and configured the

appropriate Certification Authority software, you can issue security

certificates for all base stations. After uploading the certificates to the base

stations, you can configure all maintainers’ web browsers to accept

security certificates from your own Certification Authority.

Before you have uploaded a security certificate to the base station, it

will raise a security warning when your browser connects to it for the

first time. The base station creates a self-signed certificate when the

reciter’s firmware is installed. Your browser raises a security warning

because the security certificate was not issued by a trusted Certification

Authority. The browser has a way of letting you override or bypass the

security warning.

5.2.4 Local Connection to a Base Station

Using a computer on site normally requires the computer to have an IP

address that is compatible with the sub-netting and routing used by the

communications network. Additionally, you may need to connect to a

reciter after removing it from service. In either case, you may have to

change your computer IP address configuration.

To connect the base station to your computer, ensure that your computer is

part of the same subnet as the base station, or has a route to it. Refer to your

operating system provider’s help for further information on how to do this.

Base stations leave the factory with default IP address: 192.168.1.2, Subnet

mask: 255.255.255.0. If your base station will not connect to your PC,

contact your local Tait dealer.

You may need to temporarily disconnect a networked PC from its LAN in

order to establish a direct connection with the base station. A physical

connection is needed as well as an alternate or temporary IP address and

subnet mask.

Tait TB9300 User Manual

Other manuals for Tait TB9300