Technicolor CGA4131 User Manual

3/6/2018 Proprietary and Confidential - Technicolor 60
Figure 7.7
Here are the steps to configure Band Steering from the WebUI:
• Go to Wireless / Advanced Tab and enable the Band Steering Status button.
• Set the RSSI Threshold values for 2.4GHz and 5GHz to the desired values (Valid
values are from -20 dBm to -90dBm, with a default value of -80 dBm. The values are
greyed out when the feature is disabled).
• For the Band Steering feature to work, the Network Name should be same for both
2.4GHz and 5GHz primary SSIDs. User can configure the same in Wireless / Radio
Tab. The security parameters for the 2.4GHz and 5GHz for this network should also
be same. User can set the same in Wireless / Security Tab.
Note: Do not forget to hit the Save button after all changes are made.
7.3.2 SNMP provisioning for Advanced Wireless Setting
S. No.
MIBs
Description
1
rdkbRgdot11nExtPhyRate
rdkbRgdot11nExtPhyRatesets the
transmission rate.
2
rdkbRgdot11ExtCtsProtectionE
nable
rdkbRgdot11ExtCtsProtectionEnable
sets the CTS protection mode.
3
rdkbRgDot11ExtBeaconInterval
rdkbRgDot11ExtBeaconIntervalsets
the beacon interval.
4
rdkbRgDot11ExtDTIMInterval
rdkbRgDot11ExtDTIMIntervalsets the
DTIM interval.

Technicolor CGA4131 Specifications

General

Brand	Technicolor
Model	CGA4131
Category	Gateway
Language	English