3/6/2018 Proprietary and Confidential - Technicolor 69
7.5.1 User provisioning for MAC Control
Network name can be selected from the Drop down menu.
7.5.1.2 Wi-Fi MAC Control
Wi-Fi MAC Control can be enabled by the selection Wi-Fi MAC Control option.
7.5.1.3 Access Restrictions
Select the Deny or Allow button to block or permit the MAC addresses listed to access the
The gateway can manage the network access of select client devices if they are entered in
this list using that device’s MAC address.
Click the Add button to add to the list. Add the required details in the entries and click Save
to add them into the control list.
7.5.1.5 Auto Learned Device
Auto learned devices are the Wi-Fi clients that are discovered by the gateway. The user can
add them to the MAC control list by selecting the add option in the screen.
7.5.2 SNMP provisioning for MAC Control
rdkbRgDot11BssAccessModeenables/disables MAC Filter and specifies the access
Controls what stations will be given access
to the device. If set to allowAny (0), then
any station will be allowed to connect. If
set to allowList (1), then only stations
whose MAC address appears in the
rdkbRgDot11AccessMacTable will be
allowed to connect. The value for primary
BSS is stored in non-vol. The default value
for other BSSs is 0
To Next Page
Loading...
Need help?
General
