TB30s SIP Administrator Guide v1.3 Page 3 of 259
Part 2 Product overview and connections
Introduction
This administrator guide describes how to set up, connect cables, and configure your TB30 SIP
Phone. It also provides information on how to configure the Network settings and change the
settings of your IP Phone. The administrator guide also includes the way to view and upgrade
the firmware.
Note and Caution
Note and Caution in this manual are highlighted with graphics as below to indicate important information.
Package contents
1. IP phone base unit
2. Handset
3. Stand
4. Coiled handset connecting cord
5. Quick installation and user guide
6. 1 Ethernet cable
Not included: Ethernet cable to connect any PC to the telephone through its PC switch
Optional:
1. Extension module
2. Headset
3. Power supply : model IU18-312100-WP