TB30s SIP Administrator Guide v1.3 Page 207 of 259
Automatic Hang Up
This new feature allows the phone to hang up automatically, stopping the
audio output (regardless it‟s from speaker, headset or handset) and turning
the phone into idle state. It can be configured to wait x seconds before the
hang up is done. If the value of x is set to 0, phone understands that this
feature is deactivated.
Obviously this doesn‟t enter in conflict with the signalling since the count of
seconds stars after a BYE is received.
If the phone hangs-up automatically and the handset is not physically on-
hook, on the next incoming call the user must on-hook first then off hook to
answer the call (or press the Answer softkey).
Feature activation
It can be configured via Web GUI with a new parameter sitted on Advanced |
Avanced menu:
Or by the Autoprovisioning with the parameter AutoHangUp in the [ipp]
section of APS config files (both Common or specifi-MAC):
[ipp]
…
AutoHangUpTimer = 3
…
In both cases, via Web and via Autoprovisioning, the behaviour is the same.
User introduces the number of seconds he wants the phone to wait (after
the BYE) for hanging up; 0 to deactivate.
To Next Page
Loading...
Need help?
General