Technicolor TB30 User Manual

TB30s SIP Administrator Guide v1.3 Page 75 of 259
When IncomingLock = 1, the phone will ring but the user must press the unlock key to unlock
the phone first before use the phone.
AutoLock
Use OptionVisible = … the same way as auto answer, user can choose to display or not display
in MMI with the setting in webpage Option Configure. And auto lock menu will be only
appeared and used when PhoneLockMode=1 & AutoLockTimeout != 0.
AutoLock = 0 AutoLock = 1
AutoLock Timeout
If AutoLockTimeout != 0, it will go to phone lock mode after timeout when in idle mode. The
timeout can be changed by AutoLockTimeout. AutoLockTimeout is fixed by Admin.
Example Setting
Display “Phone Locked” when dial
PhoneLockMode = 0
Key Lock without incoming call lock
PhoneLockMode = 1
IncomingLock = 0
Key Lock with incoming call lock
PhoneLockMode = 1
IncomingLock = 1
Password Protection
Same as Current implementation
Date
Hour
Icons
Incoming Call Lock
Unlock
Date
Hour
Icons
Config
Admin
Option
Date
Hour
Icons
DoNotDisturb-OFF
PhoneLock-OFF
PhoneAutoLock-OFF
Reboot
Change
Back
Date
Hour
Icons
DoNotDisturb-OFF
PhoneLock-OFF
PhoneAutoLock-ON
Reboot
Change
Back
Idle
Menu
PIN Setting
Config

Technicolor TB30 Specifications

General

Brand	Technicolor
Model	TB30
Category	IP Phone
Language	English