Technicolor TB30 User Manual

TB30s SIP Administrator Guide v1.3 Page 47 of 259
Part 6 Configuration via Web Interface
Configuration through the Web interface
The phone can also be configured using the web browser. It has a friendly web interface to set
and modify parameters.
Step 1 – Before starting
The IP phone should be connected to the Network and then be powered it up before the
connection to the web server.
Step 2 – Connect to the IP Phone web server
1) Start a web browser session
2) Input the phone‟s IP address into the address field.
For example:
i. http://10.1.97.6 for user mode.
ii. http://10.1.97.6/admin.html for admin mode.
3) Enter the username (by default: administrator)
4) Enter the password (by default: 784518)
5) Once the process is completed, you can change the settings values to your
convenience.
Step 3 – Reboot the phone
Some parameters will require the phone to be rebooted for changes to be operated.
The web pages below will be displayed once you have input the phone‟s IP address into the
address field.
Find IP Address
There are two ways to check the phone IP address.
 Long press MENU
 Press MENU to enter operation manual. Press Config soft key and then choose
« Information »

Technicolor TB30 Specifications

General

Brand	Technicolor
Model	TB30
Category	IP Phone
Language	English