TB30s SIP Administrator Guide v1.3 Page 97 of 259
In order to have List-oriented BLF active, APS or web gui can be used.
First you have to decrease Multiline (or use an extension module) to reserve
the number of supervised lines in Function Key, in Advanced Advanced.
Then go to Advanced Call feature. Parameter “Start Spare Fk” indicates
the first function key which will be dynamically provisioned.
This parameter, by default, is automatically set to Multiline+1. If you want
to keep some keys reserved for speeddial, please change this value
Select “List-oriented BLF”, and configure the List-uri to which the phone
should subscribe, in accordance with your server configuration
Then, you can check the configuration through Advanced Call feature
Function Key table.
To enable the call pickup feature from function key BLF, please enter the
starcode defined in your server.
B) Through APS:
The parameters governing this feature, both included in the [sys] section,
are:
BLFType
Value : 0, 1 or 2
0 : User-oriented BLF is active
1 : List-oriented BLF is active
2 : Presence based BLF is active
Default value: 0
BLFListSipUri
Value: L/<sip:user@host>
Meaning: contains the URI of the List the phone will need to subscribe in
order to monitor users. This URI has to be provided by your sip server
administrator.
StartSpareFK
Value : numeric, from Current_Max_Multiline+1 to the number of function
keys available
Meaning : n : Fn will be the first position to be automatically filled in via List-
oriented BLF dynamic provisioning.
Default value: Current_Max_Multiline+1
Current_Max_Multiline
Value: 1 to 10
Meaning: number of simultaneous calls the phone will handle. BLF is not
possible with keys assigned to multiline, that is why this parameter needs to
To Next Page
Loading...
Need help?
General