Technicolor TB30 User Manual

TB30s SIP Administrator Guide v1.3 Page 108 of 259
Feature Activation
Via WebGui
Visit the SETUP  Basic Setup  select Profile page, as shown like below:
With the activation of SIPS + TLS, you are required to upload a Certificate
and Private Key for authentication on the phone. Set port to be 5061. The
certificate from trusted authorities can be imported to create an internal
Certificate Authority (CA).
Visit the SETUP  Basic Setup  SIPS page
Via APS
APS in [sip] section of both Common and Specific-MAC config files with the
new parameters:
For SIPS, the parameters are URLTypeMP[profile_id] = and
URLTypeBk[profile_id] = ,
where, 0 – sip URL type, (default)
1 – tel URL type,
2 – sips URL type
[sip]
…
URLTypeMP1=0 // sip url type for profile 1
URLTypeMP2=1 // tel url type for profile 2
URLTypeMP3=2 // sips url type for profile 3
URLTypeMP4=0 // sip url type for profile 4
URLTypeBK1=0 // sip url type for backup profile 1
URLTypeBK2=1 // tel url type for backup profile 2
URLTypeBK3=2 // sips url type for backup profile 3
URLTypeBK4=0 // sip url type for backup profile 4
…
For TLS, the parameters are TransportFlgMP[profile_id] = and
TransportFlgBK[profile_id] = ,
where, 0 – UDP (default)
1 – TCP
2 – TLS
[sip]
…
TransportFlgMP1=0 // UDP for profille 1
TransportFlgMP2=1 // TCP for profille 2
TransportFlgMP3=2 // TLS for profille 3
TransportFlgMP4=2 // TLS for profille 4
TransportFlgBK1=0 // UDP type for backup profile 1
TransportFlgBK2=1 // TCP type for backup profile 2
TransportFlgBK3=2 // TLS type for backup profile 3

Technicolor TB30 Specifications

General

Brand	Technicolor
Model	TB30
Category	IP Phone
Language	English