Operating Information
TLA5000 Series Service Manual
2-5
Follow these steps to power on the instrument.
CAUTION. To prevent damage to the accessories, connect the keyboard, mouse,
and other accessories before applying power to the product.
1. Connect the power cord (see Figure 2--4 for the AC power location).
2. If you have an external monitor, connect the power cord and video cable to
the logic analyzer and then power on the monitor.
3. Press the On/Standby switch to power on the instrument (see F igure 2 --4 for
the switch location).
4. Wait for the self test to complete and the application to start.
On/Standby
Switch
Rear panel
AC Power
Figure 2- 4: On/Standby and AC Power switch locations
The logic analyzer has a built-in soft power-off function that safely powers off
the logic analyzer when you press the On/Standby switch.
To completely remove power to the instrument, press the On/Standby switch,
and then remove the power cord from the rear panel. You can also shut down the
instrument through the Windows Start Menu.
Power On the Logic
Analyzer
Powering Off the Logic
Analyzer
To Next Page
Loading...
Need help?
General
