Maintenance
TLA5000 Series Service Manual
6-3
The logic analyzer display is a soft plastic display and must be treated with care
during cleaning.
CAUTION. To prevent damage to the flat panel display, do not use improper
cleaning agents or methods.
Avoid using abrasive cleaners or commercial glass cleaners to clean the display
surface.
Avoid spraying liquids directly on the display surface.
Avoid scrubbing the display with excessive force.
Clean the flat panel display surface by gently rubbing the display with a
clean-room wipe (such as Wypall Medium Duty Wipes, #05701, available from
Kimberly-Clark Corporation).
If the display is very dirty, moisten the wipe with distilled water or a 75%
isopropyl alcohol solution and gently rub the display surface. Avoid using excess
force or you may damage the plastic display surface.
Flat Panel Display
Cleaning
To Next Page
Loading...
Need help?
General
