Unit Operation with TG-VI Controller
53
Changing the Setpoint
The setpoint temperature of the Thermo King unit can be
quickly and easily changed.
1. With the standard display on the screen, press the U
P or
D
OWN key until the setpoint is at the desired temperature
setting.
Press and release either key repeatedly to cause the
temperature to change by 1 (or 0.1 degrees if programmed
to do so).
Hold either key down to cause the temperature to scroll
automatically. The longer the key is depressed, the faster
the scrolling speed.
2. Press and release the E
NTER key within 10 seconds to
enter the new setpoint into memory.
The display will briefly show Lod (load) in the lower
readout.The new setpoint will appear on the display. The unit
now operates with the new setpoint.
CAUTION: Make sure the ENTER key was pressed in
the first 10 seconds, or the original setpoint will
return to the screen and control the unit.
1. Up Key 3. Setpoint
2. Down Key 4. Enter Key
Figure 23: Changing the Setpoint
AJA1077
1
3
4
2
Unit Operation with TG-VI Controller
53
Changing the Setpoint
The setpoint temperature of the Thermo King unit can be
quickly and easily changed.
1. With the standard display on the screen, press the U
P or
D
OWN key until the setpoint is at the desired temperature
setting.
Press and release either key repeatedly to cause the
temperature to change by 1 (or 0.1 degrees if programmed
to do so).
Hold either key down to cause the temperature to scroll
automatically. The longer the key is depressed, the faster
the scrolling speed.
2. Press and release the E
NTER key within 10 seconds to
enter the new setpoint into memory.
The display will briefly show Lod (load) in the lower
readout.The new setpoint will appear on the display. The unit
now operates with the new setpoint.
CAUTION: Make sure the ENTER key was pressed in
the first 10 seconds, or the original setpoint will
return to the screen and control the unit.
1. Up Key 3. Setpoint
2. Down Key 4. Enter Key
Figure 23: Changing the Setpoint
AJA1077
1
3
4
2
To Next Page
Loading...
Need help?
General