Thermo King SB-200TG User Manual

Unit Operation with TG-VI Controller
56
Initiating a Manual Defrost Cycle
1. The unit must be running in Continuous or
CYCLE-SENTRY mode or be in CYCLE-SENTRY Null
mode and the coil temperature must be below 45 F (7 C).
2. Press the S
ELECT key until the dEF (defrost) prompt
appears in the display.
3. Press the E
NTER key to enter a Defrost cycle. The display
will briefly show Lod (load). The unit will then enter a
Defrost cycle. The Defrost cycle will terminate
automatically.
NOTE: The E
NTER key must be pressed to enter a Defrost
cycle. The display will return to the Standard Display in
about 10 seconds and the defrost mode will not be entered
unless the E
NTER key is pressed.
1. Select Key 2. Enter Key
Figure 25: Initiating a Manual Defrost Cycle
AMA60
1
2
Unit Operation with TG-VI Controller
56
Initiating a Manual Defrost Cycle
1. The unit must be running in Continuous or
CYCLE-SENTRY mode or be in CYCLE-SENTRY Null
mode and the coil temperature must be below 45 F (7 C).
2. Press the S
ELECT key until the dEF (defrost) prompt
appears in the display.
3. Press the E
NTER key to enter a Defrost cycle. The display
will briefly show Lod (load). The unit will then enter a
Defrost cycle. The Defrost cycle will terminate
automatically.
NOTE: The E
NTER key must be pressed to enter a Defrost
cycle. The display will return to the Standard Display in
about 10 seconds and the defrost mode will not be entered
unless the E
NTER key is pressed.
1. Select Key 2. Enter Key
Figure 25: Initiating a Manual Defrost Cycle
AMA60
1
2

Thermo King SB-200TG Specifications

General

Brand	Thermo King
Model	SB-200TG
Category	Heater
Language	English