63
Alarm Codes
Introduction
An alarm is generated when the microprocessor senses an
abnormal condition. Alarms direct an operator or service
technician to the source of a problem.
Multiple alarms can be present at one time. All generated
alarms will be stored in memory until cleared by the operator.
Document all alarm occurrences and report them to the service
technician.
NOTE: The chart on the following pages shows all possible
alarm codes for all possible applications. Not all codes will be
applicable to each individual unit.
Repair
The operator can repair certain faults, other faults can only be
repaired by your Thermo King Dealer. Refer to the table on the
following pages for the proper corrective action.
NOTE: Document all alarm faults and report them to the
service technician.
NOTE: Alarms with an asterisk (*) can exist with Alarm
Code 84. The alarm can clear automatically if the condition
does not reoccur.
NOTE: The corrective actions listed on the “Table of Alarm
Codes” are suggestions only. Always consult your company
for final decisions.
63
Alarm Codes
Introduction
An alarm is generated when the microprocessor senses an
abnormal condition. Alarms direct an operator or service
technician to the source of a problem.
Multiple alarms can be present at one time. All generated
alarms will be stored in memory until cleared by the operator.
Document all alarm occurrences and report them to the service
technician.
NOTE: The chart on the following pages shows all possible
alarm codes for all possible applications. Not all codes will be
applicable to each individual unit.
Repair
The operator can repair certain faults, other faults can only be
repaired by your Thermo King Dealer. Refer to the table on the
following pages for the proper corrective action.
NOTE: Document all alarm faults and report them to the
service technician.
NOTE: Alarms with an asterisk (*) can exist with Alarm
Code 84. The alarm can clear automatically if the condition
does not reoccur.
NOTE: The corrective actions listed on the “Table of Alarm
Codes” are suggestions only. Always consult your company
for final decisions.
To Next Page
Loading...
Need help?
General