To Next Page

To Previous Page

Jump Starting

6. Connect the red positive (+) jumper cable to the positive

(+) battery terminal on the unit’s battery. Do not let the

other end of the jumper cable touch anything that conducts

electricity.

7. Connect the other end of the red positive (+) jumper cable

to the positive (+) battery terminal on the good battery.

8. Connect the black negative (–) jumper cable to the

negative (–) battery terminal on the good battery. Do not

let the other end of the jumper cable touch anything that

conducts electricity.

9. Connect the black negative (–) jumper cable to the lower

starter mounting bolt on the unit’s engine.

CAUTION: Allowing the positive (+) jumper cable

to short can produce dangerous sparks.

1. Lower Starter Mounting Bolt

Figure 33: Unit Engine