Toshiba B-EV4 Series User Manual

- 114 -
(12) MaxiCode data
For mode 0 or 1:
[ESC] RBaa; bbbbbbbbbcccdddeeeee --- eeeee [LF] [NUL]
For mode 2 or 3:
[ESC] RBaa; bbbbbbbbbcccdddeeeee --- eeeee [LF] [NUL]
For mode 4 or 6:
[ESC] RBaa; fffffffffggggg --- ggggg [LF] [NUL]
c bbbbbbbbb: Postal code Fixed as 9 digits
• Mode 0 or 2:
b1b2b3b4b5: Zip code Fixed as 5 digits (Numerics)
b6b7b8b9: Zip code extension Fixed as 4 digits (Numerics)
• Mode 1 or 3:
b1b2b3b4b5b6: Zip code Fixed as 6 digits (Character “A” of
code set)
b7b8b9: Vacant Fixed as 3 digits (20H)
d ccc: Class of service Fixed as 3 digits (Numerics)
e ddd: Country code Fixed as 3 digits (Numerics)
f eee --- eee: Message data strings 84 digits
g fffffffff: Primary message data strings 9 digits
h ggg --- ggg: Secondary message data strings 84 digits
NOTES: 1. When anything other than numerics is included in the data string of zip
code (mode 2), zip code extension, class of service or country code, a
MaxiCode is not drawn.
2. If the message data is less than 84 digits when mode 2 or 3 is selected,
the printer adds a CR (000000) at the end of the data, and the remaining
digits will be padded with FSs (011100). When message data
exceeding 84 digits is received, the excess data will be discarded before
drawing a MaxiCode.
3. If the message data is less than 93 digits (9 digits + 84 digits) when
mode 4 or 6 is selected, the printer adds a CR (000000) at the end of the
data, and the remaining digits will be padded with FSs (011100). When
message data exceeding 93 digits is received, the excess data will be
discarded before drawing a MaxiCode.
4. Mode 6 should not be used for usual operation since it is used for
scanner programming.

Toshiba B-EV4 Series Specifications

General

Brand	Toshiba
Model	B-EV4 Series
Category	Printer
Language	English