Toshiba B-EV4 Series User Manual

- 45 -
(11) Zero suppression
No. of zeros to be suppressed
01223 4 5
Data 0000 0000 0000 0A12 0123 0123 0123
Print 0000 0 00 A12 123 0123 0123
The leading zero(s) in a data row is replaced by a space(s) according to the designated
number of digits. However, if the number of digits to be suppressed is greater than the
data row, the data row will be drawn without zero suppression. Where the data row
exceeds the maximum number of digits (40), the data row will not be drawn. When the
font type is 51, 52, 53, 54 or 55, zero suppression is not designated. If it is designated, it
is ignored, and the printer operates as if there was no designation.
(12) Alignment
If characters are not placed on one line when equal space and automatic line feed is
designated, the following steps should be performed.
Decrease the value of the character-to-character space. When characters are not placed
on one line if the value is set to 0, return the value to its default, and then reduce the
horizontal magnification for a character by 0.5.
If characters are still not placed on one line, repeatedly decrease the value of the
character-to-character space, and then reduce the horizontal magnification. When
characters are not placed on one line if the character magnification is set to 0.5 and the
character-to-character space is set to 0, the field is not drawn. (The same previous field
is also not drawn.)
Right E q u a l s p a c eCenter
A
utomatic line feed
A
utomatic line feed
A
utomatic
Left
No. of dots of character string
area in the X direction
Designated origin
Line feed length
No. of lines

Toshiba B-EV4 Series Specifications

General

Brand	Toshiba
Model	B-EV4 Series
Category	Printer
Language	English