EasyManuals Logo

Toshiba B-EV4 Series User Manual

Toshiba B-EV4 Series
280 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #149 background imageLoading...
Page #149 background image
- 145 -
6.3.19 FLASH MEMORY FORMAT COMMAND [ESC] J1
Function Formats (initializes) the flash ROM on the CPU board for storage.
Format [ESC] J1; a (, b) [LF] [NUL]
Term a: Formatting (initializing) range
A: Entire area of the flash memory (PC save area + writable character area)
B: PC save area of the flash memory
C: Writable character storage area of the flash memory
D: True Type area
b: Drive (Omissible. When omitted, the flash ROM on the CPU board is selected.)
0: Flash ROM on the CPU board
Explanation (1) When using a new flash memory, the area to be used must be formatted
(initialized) before the PC interface command or writable characters are stored.
(2) When the already stored data (PC interface commands, writable characters, logos)
is stored again, the memory is consumed every time data is stored, unless the
Flash Memory Format Command ([ESC] J1) is transmitted.
(3) When a label issue operation is performed after the Flash Memory Format
Command is sent, the image buffer is automatically cleared.
(4) When storing of writable characters, logos, or PC interface commands is not
continued for about 10 seconds, the printer automatically enters the online mode
(label issue operation). At this time, the image buffer is automatically cleared.
Refer to Bit Map Writable Character Command ([ESC] XD)
Save Start Command ([ESC] XO)
Save Terminate Command ([ESC] XP)
Example [ESC] J1; A, 0 [LF] [NUL]

Table of Contents

Other manuals for Toshiba B-EV4 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Toshiba B-EV4 Series and is the answer not in the manual?

Toshiba B-EV4 Series Specifications

General IconGeneral
Print MethodDirect Thermal / Thermal Transfer
Power SupplyAC 100-240V, 50/60 Hz
Operating Temperature5°C to 40°C
Print Resolution203 dpi, 300 dpi
Max Print SpeedUp to 127 mm/sec (5 ips) (203 dpi) / Up to 101.6 mm/sec (4 ips) (300 dpi)
InterfaceUSB, Serial
Optional InterfacesWireless LAN
Weight2.4 kg
BarcodesCode 39, Code 128
2D CodesData Matrix, PDF417, QR Code, Maxi Code
Media Width25.4 mm to 112 mm
Media Thickness0.06 mm to 0.19 mm
Media Roll DiameterMax. 127 mm
Ribbon Width40 mm to 110 mm
Ribbon Length300 m
Operating Humidity25% to 85% non-condensing

Related product manuals