Toshiba B-EV4 Series User Manual

- 162 -
6.3.23 SAVE START COMMAND [ESC] XO
Function Declares the start of saving PC interface commands.
(Places the printer in the mode where PC interface commands are written in SD card,
or flash ROM on the CPU board.)
Format [ESC] XO; aa, (Sb, ) c [LF] [NUL]
Term aa: Identification number to be used for saving in the SD card or calling
01 to 99
dddddddd: Ignore
Sb: Drive in which the PC interface command is stored
b: Drive
0: Flash ROM on the CPU board
1: SD card (Option)
2: SD card (Option)
c: Status response at save time
0: No status response made
1: Status response made
Explanation (1) When the PC interface command is stored in the SD card, directory “PCSAVE” is
created, and then the directory “Specified file name. PCS” is created under the
“PCSAVE” directory level.
Notes (1) After sending the Save Start Command ([ESC] XO), any command other than the
following will be saved into the SD card.
• Save Start Command ([ESC] XO)
• Save Terminate Command ([ESC] XP)
• Saved Data Call Command ([ESC] XQ)
• Bit Map Writable Character Command ([ESC] XD)
• Reset Command ([ESC] WR)
• Status Request Command ([ESC] WS)
• Flash Memory Format Command ([ESC] J1)
• SD card Format Command ([ESC] JA)
(2) No error check is made for the commands at save time.
Refer to • Save Terminate Command ([ESC] XP)
• Flash Memory Format Command ([ESC] J1)
• SD card Format Command ([ESC] JA)
Examples [ESC] J1; B [LF] [NUL]
[ESC] XO; 01, 0 [LF] [NUL]
[ESC] D0508, 0760, 0468 [LF] [NUL]
[ESC] T20C30 [LF] [NUL]
[ESC] C [LF] [NUL]
[ESC] PC001; 0200, 0125, 1, 1, A, 00, B [LF] [NUL]
[ESC] PC002; 0650, 0550, 2, 2, G, 33, B, +0000000001 [LF] [NUL]
[ESC] XP [LF] [NUL]

Toshiba B-EV4 Series Specifications

General

Brand	Toshiba
Model	B-EV4 Series
Category	Printer
Language	English