Troubleshooting Procedures
2.21 HDMI Troubleshooting
To check if the computer’s HDMI is malfunctioning or not, follow the troubleshooting
procedures below as instructed.
Procedure 1: Check on HDMI TV
Procedure 2: Connector Check and Replacement Check
2.21.1 Procedure 1 Check on HDMI TV
A HDMI monitor can be connected to the HDMI out port on the computer. To connect
monitor, follow the steps as detailed below:
Note: As the port operation of all HDMI (High-Definition Multimedia Interface) monitors
have not been confirmed, some HDMI monitors may not function properly.
Connecting the HDMI out port
1. Plug one end of the HDMI cable into the HDMI out port of the HDMI device.
2. Plug the other end of the HDMI cable into the HDMI out port on your computer.
Note:
When connecting or disconnecting an HDMI device to or from the computer, only do so when
the computer is turned on or when the computer is completely turned off. Do not do so when
the computer is in Sleep Mode or Hibernation Mod
Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL] 2-73
To Next Page
Loading...
Need help?
General